Special AC Voltage |
Selection Guide |
| M100-VS1 | Suppressed zero voltage auxiliary powered |
| M100-VX1 | 1ph. aux. powered ave. sensing RMS calibrated |
| M100-VX3 | 3ph. aux powered ave. sensing RMS calibrated |
Typical Applications |
| The M100-VS1 is a self powered voltage transducer. The suppression allows the transducer to accurately measure a voltage system over a narrow band either side of a nominal voltage. The range can be between ± 10% to ± 30% which can be specified when ordering. Typical application is to display the voltage on an analogue meter with an expanded scale. This allows the user to read small changes in the voltage in a single or 3 phase system. The output could also be fed to a computer that could then control the voltage of the system, to ensure that it stays within the narrow band. The M100-VX1 and VX3 are essentially the same as the M100-VA1 and VA3, but they have auxiliaries which allow the working range to be 0-125% rather than 10-125%. Used where the average sensing of voltage is required from 0 to 125% of the nominal voltage. |
Technical Specifications |
| INPUT | |
| Rated value Un: | 57.8 < 100 / 110 < 600V |
| Power Consumption: | < 1VA (VX1,VX3)< 1.5VA (VS1) |
| Working Range: | 0-125%Un (VX1, VX3)<1.5VA(VS1) |
| Rated Frequency: | 50 / 60 / 400Hz |
| Overload Continuous: | 1.5 x Un |
| Overload for 1 sec: | 2 x Un |
| OUTPUT | |
| Rated value mA: | 0-1 / 5 / 10 / 20mA (VX1,VX3) |
| Rated value mA: | 1 / 5 / 10 / 20 & 4-20mA (VS1) |
| Rated value volts: | 0-5 / 10V (VX1,VX3) |
| Rated value volts: | 0-5 / 10V & 1-5V (VS1) |
| ADJUSTMENT | |
| Zero: | No adjustment (VX1,VX3) |
| Zero: | ± 2% (VS1) |
| Span: | ± 10% (VX1,VX3,VS1) |
| AUXILIARY | |
| A.C. Voltage : | 115 / 230V / 400 (± 25% / 45-65Hz/<2VA) |
| D.C. Voltage: | 24/48/110V(± 20% galvanically isolated /3W) |
| Note M100-VS1 is self powered | |
| WEIGHT&CASE SIZE | |
| M100-VS1,VX1 | Approx 0.4 kg. 55mm case |
| M100-VX3 | Approx 0.7 kg. 100mm case |
Ordering Information |
| Product Code | Input Un | Output | Aux | Freq | Options |
| M100-VS1 | 0-500șC110V ± 15% | 20mA | - | 50Hz |
Options |
| 1 | Non standard inputs / outputs where technically viable |
| 2 | A.C. Auxiliary in range 57.7 to 450 volts |
| 3 | Calibration at nominal Hz 35...450Hz |
| 4 | Calibration at temperature other than 23șC |
Data Sheet in PDF Format Available here
Contact sales: sales@hobut.co.uk
