General Specifications |
Environmental |
| Working Temperature | 0 to +60 deg C |
| Functional Temperature | -25 to +70 deg C |
| Storage Temperature | -40 to 85 deg C |
| Temperature Coefficient | 0.02% per deg (200 ppm/ºC) |
| Relative Humidity | 95% non condensing |
| Class of Climate | HSE complying with DIN 40040 |
| -3 complying with VDE/VDI 3540 |
Relay Output |
| Relay Type | dual pole change over |
| Material | Silver / Candium |
| Contact Resistance | 200mOhm max typically < 50mOhm |
| Rating AC: | 250V 10A |
| Rating DC | 150V 10A |
| Electrical Life | 1 x 105 at above load |
| Mechanical Life | 5 x 106 |
| Operating time approx | 7mS (20mS max) |
| Dielectric strength | Between coil and contacts |
| 5kV RMS 1min | |
| Between Adjacent contacts | |
| 1kV RMS 1min | |
| Insulation resistance | 1000M Ohm at 500V DC |
| Operating temperature | -30 to +75 deg C |
| Approval | UL and CSA recognised |
Insulation |
| Test Voltage | 4kV RMS 50Hz 1 min between Input/Case/Auxiliary |
| Impulse Test | EMC 5kV transient complying with IEC 801 / |
| EN55020 | |
| HF interference test | EHF 2.5kV 1MHz complying with IEC 255-4 |
| Protection Class | II complying with IEV 348 |
Applied Standards |
| General | IEC 144 / BS 5420 / VDE / VDI0435 / IEC 947 |
| / EN6094 | |
| Safety | IEC 348 / BS4753 DIN 57411 / VDE 0411 |
| ANSI C37 | |
| Surge withstand | IEC 801 / EN 55020 ANSI C37-90A |
| Radio Screening | RFI degree N complies with VDE 0875 |
| VDE 0875 |
Enclosures & Approvals |
| Fixing | Snap on to DIN ail 35mm x 7.5mm complies with |
| DIN-EN 50022 BS5584 | |
| Mounting | Any position |
| Enclosure code | Case IP 50 / terminals IP 30. Complies with |
| IEC 529 BS5490 DIN 40050 | |
| U.L.Approval | File No E157034 |
Case Dimensions |
Data Sheet in PDF Format Available here
Contact sales: sales@hobut.co.uk
